Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the left luggage side trim. (Refer to Body - "Luggage Side Trim") |
3. |
Disconnect the fuel filler door release actuator connector (A).
|
4. |
Remove the fuel filler door housing. (Refer to Body - "Fuel Filler Door") |
5. |
Remove the fuel filler door release actuator (A) after loosening the mounting bolts.
|
Installation |
1. |
Install the fuel filler door release actuator. |
2. |
Install the fuel filler door housing. |
3. |
Connect the fuel filler door release actuator connector. |
4. |
Install the left luggage side trim. |
5. |
Connect the negative (-) battery terminal. |
Inspection |
1. |
Check for continuity between terminals No. 2 and No. 4. If there is no continuity, replace the fuel filler door release actuator.
|
Kia Niro (DE HEV) Owners Manual: Electronic stability control (ESC)
The Electronic Stability Control (ESC) system is designed to stabilize the vehicle
during cornering maneuvers. ESC checks where you are steering and where the vehicle
is actually going. ESC applies the brakes at individual wheels and intervenes with
engine management system to stabilize the ...
Kia Niro 2017 (DE HEV) Service Manual: Hybrid Control Unit (HCU) Repair procedures
Removal
•
Be sure to read and follow the “General Safety Information and
Caution” before doing any work related with the high voltage system.
Failure to follow the safety instr ...