Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") |
3. |
Remove the crash pad lower switch (A) after loosening the mounting screws.
|
Installation |
1. |
Install the crash pad lower switch. |
2. |
Install the crash pad lower panel. |
3. |
Connect the negative (-) battery terminal. |
Inspection |
1. |
Check for continuity between the terminals. If there is an abnormality, replace the switch.
|
Kia Niro 2017 (DE HEV) Service Manual: High voltage shut-off procedures
High Voltage Shut-off Procedures
•
Be sure to read and follow the “General Safety Information and
Caution” before doing any work related with the high voltage system.
Failure t ...
Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Diagnosis With KDS/GDS
1.
BSD system defects can be quickly diagnosed with the KDS/GDS. GDS operates
actuator quickly to monitor, input/output value and self diagnosis.
2.
Connect the cable of KDS/GDS to the data link connector in driver side ...