Kia Niro: Body Side Molding / Front Wheel Guard Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the front tire.

2.

Remove the front wheel guard (A), after loosening the mounting clips and nuts.

3.

Install in the reverse order of removal.

  

Replace any damaged clips.

Quarter Garnish Repair procedures
Replacement    Put on gloves to protect your hands.    ...

Rear Wheel Guard Repair procedures
Replacement    Put on gloves to protect your hands.    ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Injector Troubleshooting
Signal Waveform The three waveforms below are taken from the #1 and #4 injectors. The top waveform is from the high side (feed side) of the #1 and #4 injectors, while the middle waveform is from the low side (ground side) of the #1 injector and the bottom waveform is from the low ...

Kia Niro 2017 (DE HEV) Service Manual: Motor Control Unit(MCU) Repair procedures
Removal    • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety instr ...

© 2016-2024 www.kniro.net