Kia Niro: Light bulbs / Front turn signal lamp bulb replacement
1. Open the hood.
2. Remove the dust cover (A) from the headlamp assembly then bulbsocket by turning the counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp assembly.
3. Remove the bulb from the bulbsocket by pressing it in and rotating it counterclockwise until the tabs on the bulb align with the slots in the bulb-socket. Pull the bulb out of the bulb-socket
4. Insert a new bulb by inserting it into the bulb-socket and rotating it until it locks into place.
5. Install the socket in the headlamp assembly by aligning the tabs on the bulb-socket with the slots in the assembly. Push the bulb-socket into the headlamp assembly and turn the socket clockwise.
Headlamp bulb
WARNING - Halogen bulbs
Halogen bulbs contain pressurized gas that will produce flying pieces
of glass if broken.
Always handle them carefully, and avoid scratches and abrasions. If the
...
Fog lamp/DRL bulb replacement
If the front fog lamp (Bulb) and DRL bulb(LED) does not operate, we recommend
that you checked an authorized Kia dealer. ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Front Door Belt Inside Weatherstrip Repair procedures
Replacement
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2.
Remove the front door belt inside weatherstrip (A).
3.
Install in the reverse order of removal.
...
Kia Niro 2017 (DE HEV) Service Manual: Water Jacket Insert Repair procedures
Removal and Installation
1.
Remove the cylinder head.
(Refer to Cylinder Head Assembly - "Cylinder Head")
2.
Remove the water jacket insert (A).
3.
Install in the reverse order of removal.
...
