Kia Niro: Front Seat Belt / Front Seat Belt Buckle Repair procedures

Replacement
1.

Remove the front seat assembly.

(Refer to Front Seat - "Front Seat Assembly")

2.

Remove the front seat belt buckle (A) after loosening the mounting bolt.

Tightening torque :

39.2 - 53.9 N·m (4.0 - 5.5 kgf·m, 28.9 - 39.8 lb·ft)

3.

Install in the reverse order of removal.

  

Make sure that the connector is plugged in properly.

Replace any damaged clips.

Front Seat Belt Buckle Components and components location
Component Location 1. Front seat belt buckle ...

Hood
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Engine Clutch Actuator Components and components location
Components 1. Clutch disc 2. Clutch cover 3. Concentric slave cylinder 4. Hybrid motor assembly 5. Engine clutch actuator 6. Reservoir ...

Kia Niro 2017 (DE HEV) Service Manual: Blind Spot Detection Radar Calibration Description and operation
Description To correctly sense vehicles on the neighboring lanes using the radar, the direction of the sensor and the direction of the vehicle must be aligned. This is the BSD unit alignment. If this alignment is not performed as in illustration below, it may cause degradation of ...

© 2016-2024 www.kniro.net