Kia Niro: Timing System / Front Oil Seal Repair procedures

Replacement
1.

Remove the crankshaft damper pulley.

(Refer to Drive Belt System - "Crankshaft Damper Pulley")

2.

Remove the front oil seal (A).

3.

Apply engine oil to a new oil seal lip & outer surface.

  

Remove any debris from the lip portion of the oil seal.

4.

Using the SSTs (09231-G2100, 09231-H1100), install the front oil seal (A).

  

Always use new oil seal.

5.

Install the crankshaft damper pulley.

(Refer to Drive Belt System - "Crankshaft Damper Pulley")

Components and components location
Components 1. Front oil seal 2. Timing chain cover 3. Variable force solenoid (VFS) valve 4. O-ring 5. Timing chain tensioner 6. Timing chain ...

Timing Chain Cover Repair procedures
Removal    • Be sure to read and follow the “General Safety Information and Caution” ...

Other information:

Kia Niro (DE HEV) Owners Manual: Driving in the rain
Rain and wet roads can make driving dangerous, especially if you’re not prepared for the slick pavement. Here are a few things to consider when driving in the rain: A heavy rainfall will make it harder to see and will increase the distance needed to stop your vehicle, so slow down. Keep ...

Kia Niro 2017 (DE HEV) Service Manual: Engine Control Module (ECM) Schematic diagrams
ECM Terminal And Input/Output signal ECM Terminal Function Connector [A] Pin No. Description Connected to 1 Injector (Cylinder #3) [Low] control Injector (Cylinder #3) 2 ...

© 2016-2022 www.kniro.net