Removal |
1. |
Disconnect the battery negative terminal, and wait for at least thirty seconds before beginning work. |
2. |
Disconnect the front impact sensor connector (A).
|
3. |
Loosen the mounting bolts. Remove the front collision detection sensor (B).
|
Installation |
1. |
Install in the reverse order of removal |
Do not turn the ignition switch ON and do not connect the battery terminal while replacing the front impact sensor. |
Kia Niro 2017 (DE HEV) Service Manual: General information
Towing
In the event of an accident, The high voltage system must be disabled. The service
plug must be removed from the high voltage battery according to one of the methods
described in sections of page 17 to 20 to disable the vehicle.
Towing Niro is not different from towing conventional FWD ...
Kia Niro 2017 (DE HEV) Service Manual: Hybrid Control Unit (HCU) Repair procedures
Removal
•
Be sure to read and follow the “General Safety Information and
Caution” before doing any work related with the high voltage system.
Failure to follow the safety instr ...