Kia Niro: Front Door / Front Door Trim Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the front door quadrant inner cover (A) by using a remover.

2.

Disconnect the cap (A) after loosening the screw.

3.

Remove the front door trim (A).

4.

Remove the front door inside handle cage (A). Disconnect the IMS connector (B).

5.

Disconnect the power window switch connector (A) and IMS switch connector (B).

6.

Install in the reverse order of removal.

  

Make sure the connector is connected properly.

Make sure the door locks/unlocks and opens/closes properly.

Replace any damaged clips.

Front Door Trim Components and components location
Component Location 1. Front door trim ...

Front Door Inside Handle Repair procedures
Replacement    Put on gloves to protect your hands.    ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description Body Control Module (BCM) function No Item Description 1 Washer Linked Wiper – If the washer switch is pressed ON for 0.06-0.2 second with the vehicle mode in IG ...

Peugeot 2008 2019-2022 Owner's Manual: Media
USB port Insert the USB memory stick into the USB port or connect the USB device to the USB port using a suitable cable (not supplied). To protect the system, do not use a USB hub. The system builds playlists (in temporary memory); this operation can take from a few seconds to several minutes ...

© 2016-2022 www.kniro.net