Kia Niro: Body Side Molding / Fender Garnish Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body (Interior and Exterior) / Body Side Molding / Fender Garnish Repair procedures

Replacement

Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•	Be careful not to bend or scratch the trim and panels.

1.	Loosen the fender garnish mounting screws.

2.	Using a remover, remove the fender garnish (A).

Install in the reverse order of removal.

Replace any damaged clips.

Rear Spoiler Repair procedures

Replacement Put on gloves to protect your hands. ...

Quarter Garnish Repair procedures

Replacement Put on gloves to protect your hands. ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Mass Air Flow Sensor (MAFS) Repair procedures
Inspection 1. Visually check the MAFS for the following: – Correct mounting direction – Any contamination, corrosion or damage on connector – Clogged or we ...

Kia Niro 2017 (DE HEV) Service Manual: Troubleshooting
Basic Troubleshooting Basic Inspection Procedure Measuring Condition of Electronic Parts' Resistance The measured resistance at high temperature after vehicle running may be high or low. So all resistance must be measured at ambient temperature (20°C, 68°F), unless stated ot ...