Kia Niro: Air Conditioning System / Evaporator Temperature Sensor Repair procedures

Inspection
1.

Switch "OFF" the ignition.

2.

Disconnect the evaporator temperature sensor connector.

3.

Measure the resistance between positive (+) and negative (-) terminals of the evaporator temperature sensor.

Specification

Evaporator core temperature
[°C (°F)]
Resistance [k?]
Voltage [V]
-10 (14)
43.35
2.96
0 (32)
27.62
2.40
10 (50)
18.07
1.88
20 (68)
12.11
1.44
30 (86)
8.30
1.08
40 (104)
5.81
0.81

1. Evaporator sensor (+)
2. Sensor ground

Replacement
1.

Remove the evaporator core.

(Refer to Air Conditioner - "Evaporator Core".)

2.

Remove the evaporator temperature sensor (A).

3.

Install in the reverse order of removal..

Evaporator Temperature Sensor Description and operation
Description The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessiv ...

In-car Sensor Description and operation
Description The in-car air temperature sensor is built into the heater & A/C control unit. The sensor consists of a thermistor that measures the temperature inside the vehicle. T ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Rheostat Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the crash pad plate [LH] (A) after loosening the screws. ...

Kia Niro 2017 (DE HEV) Service Manual: Components and components location
Component Location 1. Body control module (BCM) 2. Rear glass defogger switch (Audio Type) 3. Rear glass defogger switch (AVN Type) 4. Rear glass defogger ...

© 2016-2024 www.kniro.net