Kia Niro: ESP(Electronic Stability Program) System / ESP OFF Switch Repair procedures

Removal
1.

Turn ignition switch OFF and disconnect the negative (-) battery terminal.

2.

Remove the crash pad lower panel.

(Refer to Body -"Crash pad")

3.

Remove the side crash pad switch assembly.

4.

Check the continuity between the switch terminals as the ESP OFF switch is engaged.

ESP OFF Switch Description and operation
Description 1. The ESP OFF switch is for the user to turn off the ESP system. 2. The ESP OFF lamp is on when ESP OFF switch is engaged. ...

Emergency Signal System Description and operation
Description Introduction of quick brake warning system (ESS) In case of quick brake by driver, the brake lamp or turn signal is blinked to warn against the vehicle at rear. ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Components and components location
Component Location 1. Engine 2. Hybrid Drive Motor Assembly 3. Hybrid Starter Generator (HSG) 4. Transaxle 5. High Voltage Battery System Assembly 6. Power Cable ...

Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description • The Hybrid motor system is equipped with two electric motors (HSG, Drive motor). • The traction motor operates to move the vehicle and to provide lower Noise, Vibration, Harshness (NVH) during driving and to achieve fuel ...

© 2016-2023 www.kniro.net