Kia Niro: Engine And Transaxle Assembly / Engine Mounting Components and components location

Kia Niro 2017 (DE HEV) Service Manual / Engine Mechanical System / Engine And Transaxle Assembly / Engine Mounting Components and components location

Components

1. Transaxle mounting bracket
2. Roll rod bracket
3. Engine mounting bracket
4. Engine mounting support bracket

Engine Room Under Cover Repair procedures
Removal Engine room under cover. 1. Remove the engine room under cover (A). Tightening torque : 3.9 - 5.9 N·m (0.4 - 0.6 kgf·m, 2.9 - 4.3 lb· ...

Engine Mounting Repair procedures
Removal and Installation Engine Mounting Bracket 1. Remove the engine room under cover. (Refer to Engine and Transaxle Assembly - "Engine Room Under Cover") ...

Other information:

Kia Niro (DE HEV) Owners Manual: Tires
Adjust the tire inflation pressures to specification. Low tire inflation pressures will result in overheating and possible failure of the tires. Avoid using worn or damaged tires which may result in reduced traction or tire failure. ✽ NOTICE Never exceed the maximum tire inflation pressure ...

Kia Niro (DE HEV) Owners Manual: Closing the hood
1. Before closing the hood, check the following: All filler caps in the engine compartment must be correctly installed. Gloves, rags or any other combustible material must be removed from the engine compartment. 2. Lower the hood halfway and push down to securely lock in place. Then ...

© 2016-2022 www.kniro.net