Kia Niro: ESP(Electronic Stability Program) System / Emergency Signal System Description and operation

Description

Introduction of quick brake warning system (ESS)

In case of quick brake by driver, the brake lamp or turn signal is blinked to warn against the vehicle at rear.

Basic function (Blinking the brake lamp/emergency lamp)

–	Operation condition: In case of quick brake or operation of ABS above in a certain speed

–	Releasing condition: In case of stopping the quick brake or releasing the ABS operation

Additional function (Blinking the turn signal)

–	Operation condition: In case of quick brake in low speed

–	Releasing condition: Releasing at the start of driving

System configuration

ESS Circuit diagram

Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - ...

...

Kia Niro 2017 (DE HEV) Service Manual: Rear Oil Seal Repair procedures
Replacement • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety i ...

Kia Niro 2017 (DE HEV) Service Manual: Hybrid Drive Motor Assembly Repair procedures
Inspection 1. Using mΩ tester, measure the line-to-line resistance. Item Inspection area Specification Remarks Phase-to-phase resistance Pins U - ...