Kia Niro: Inside rearview mirror / Electrochromic mirror (ECM)
The electric rearview mirror automatically controls the glare from the headlights of the vehicles behind you in nighttime or low light driving conditions. The sensor (3) mounted in the mirror senses the light level around the vehicle, and automatically controls the headlight glare from the vehicles behind you.
When the engine is running, the glare is automatically controlled by the sensor mounted in the rearview mirror.
Whenever the shift lever is shifted into reverse (R), the mirror will automatically go to the brightest setting in order to improve the drivers view behind the vehicle.
CAUTION
When cleaning the mirror, use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror. It may cause the liquid cleaner to enter the mirror housing.
To operate the electric rearview mirror:
- The mirror defaults to the ON position whenever the ignition switch is turned on.
- Press the ON/OFF button (1) to turn the automatic dimming function off. The mirror indicator light (2) will turn off.
Press the ON/OFF button (1) to turn the automatic dimming function on. The mirror indicator light (2) will illuminate.
Day/night rearview mirror
Make this adjustment before you start driving and while the day/night lever(3)
is in the day position (1).
Pull the day/night lever(3) toward you (2) to reduce the glare from the headlights
of ...
Outside rearview mirror
Be sure to adjust the mirror angles before driving.
Your vehicle is equipped with both left-hand and right-hand outside rearview
mirrors. The mirrors can be adjusted remotely with the remote switch ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Warning Lamp Activation
Warning Lamp Behavior after Ignition
On
As soon as the operating voltage is applied to the SRSCM ignition input, the
SRSCM activates the warning lamp for a LED lamp check.
The lamp shall turn on for 6 seconds during the initialization phase ...
Kia Niro (DE HEV) Owners Manual: Phone
Select the [SETUP] button on the audio system ➟ Select [Phone].
Connections: Control pairing, deletion, connection and disconnection of
Bluetooth® devices.
Auto connection priority(Auto Connection Priority): Set the connection priority
of Bluetooth® devices when the vehicle is starte ...
