Kia Niro: Engine Control System / Electric EGR Control Valve Description and operation
| Description |
The Electric EGR Control Valve is a solenoid valve installed between the EGR cooler and the exhaust line that controls the EGR (Exhaust Gas Recirculation) amount by the ECM's duty control signal depending on engine load and the intake air demand.
The Exhaust Gas Recirculation (EGR) system is used to add the exhaust gas to intake air in order to reduce an excess of air and the temperature in the combustion chamber.
Electric EGR Control Valve Specifications
Specification
[Motor]
Item
Specification
Coil Resistance (Ω)
2.21 - 2.99 [20°C(68°F)]
Pin
2
...
Electric EGR Control Valve Schematic diagrams
Circuit Diagram
Harness Connector
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: DCT(Dual Clutch Transmission) Repair procedures
Removal
•
Be sure to read and follow the “General Safety Information and
Caution” before doing any work related with the high voltage system.
Failure to follow the safety instr ...
Kia Niro 2017 (DE HEV) Service Manual: Troubleshooting
Troubleshooting
Symptom
Possible cause
Remedy
Hard steering
Improper front wheel alignment
Excessive turning resistance of lower arm ball joint
Low tire pressure
No power assist
Correct
Replac ...
