Kia Niro: Intake And Exhaust System / EGR Cooler Repair procedures

Removal and Installation
1.

Disconnect the negative battery terminal.

2.

Remove the engine room under cover.

(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")

3.

Drain the coolant.

(Refer to Cooling System - "Coolant")

4.

Disconnect the EGR cooler coolant hose (A).

5.

Disconnect the heater pump coolant hose (A).

6.

Remove the exhaust manifold.

(Refer to Intake and Exhaust System - "Exhaust Manifold")

7.

Remove the EGR cooler (A).

Tightening torque :

18.6 - 23.5 N·m (1.9 - 2.4 kgf·m, 13.7 - 17.4 lb·ft)

8.

Install in the reverse order of removal.

9.

Fill the coolant.

(Refer to Cooling System - "Coolant")

EGR Cooler Description and operation
Operation ...

Intake Manifold Components and components location
Components 1. Intake manifold gasket 2. Intake manifold 3. Intake manifold stay 4. EGR cooler pipe C gasket 5. Electronic throttle control (ETC) ...

Other information:

Kia Niro (DE HEV) Owners Manual: OFF
Not illuminated To turn off the engine (START/RUN position) or vehicle power (ON position), press the engine start/stop button with the shift lever in the P (Park) position. When you press the engine start/stop button without the shift lever in the P (Park) position, the engine start/stop b ...

Kia Niro (DE HEV) Owners Manual: Cruise Control system
■ Type A ■ Type B 1. Cruise indicator 2. Cruise set indicator The cruise control system allows you to program the vehicle to maintain a constant speed without pressing the accelerator pedal. This system is designed to function above approximately 30 km/h (20 mph). WARNING If the ...

© 2016-2022 www.kniro.net