Inspection |
1. |
Check that the voltage between No. 1 and 2 duct sensors change.
Specification
|
Replacement |
[Duct sensor - Floor]
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") |
3. |
Loosen the mounting screw and remove the cockpit shower duct (A).
|
4. |
Remove the connector (A). Then, turn the duct sensor (B) by 90° in the counterclockwise direction to remove it.
|
5. |
install in the reverse order of removal |
[Duct sensor - Vent]
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") |
3. |
Loosen the mounting screw and remove the cockpit shower duct (A).
|
4. |
Turn the duct sensor (A) by 90° in the counterclockwise direction to remove it.
|
5. |
Install in the reverse order of removal. |
Kia Niro (DE HEV) Owners Manual: Cup holder
WARNING - Hot liquids
Do not place uncovered cups of hot liquid in the cup holder while the
vehicle is in motion. If the hot liquid spills, you may burn yourself. Such
a burn to the driver could lead to loss of control of the vehicle.
To reduce the risk of a personal injury in the event ...
Kia Niro (DE HEV) Owners Manual: Brake fluid
Checking the brake fluid level
Check the fluid level in the reservoir periodically. The fluid level should be
between MAX and MIN marks on the side of the reservoir.
Before removing the reservoir cap and adding brake fluid, clean the area around
the reservoir cap thoroughly to prevent brake ...