Kia Niro: Hybrid Motor Assembly / Description and operation

Description

The Hybrid motor system is equipped with two electric motors (HSG, Drive motor).

The traction motor operates to move the vehicle and to provide lower Noise, Vibration, Harshness (NVH) during driving and to achieve fuel efficiency.

The electric motor takes on the role of a generator during deceleration and braking.

The Hybrid Starter Generator (HSG) starts the engine while the vehicle is in motion.

Hybrid Motor Assembly
...

Hybrid Drive Motor Assembly Components and components location
Components 1. Dual clutch transmission assembly (DCT) 2. Hybrid drive motor assembly 3. Concentric slave cylinder 4. Engine clutch actuactor assembly ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Rear Assist Arm Repair procedures
Removal 1. Disconnect the battery negative cable. 2. Remove the wheel and tire. Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft) ...

Kia Niro (DE HEV) Owners Manual: START/RUN
Not illuminated To start the engine, depress the brake pedal and press the engine start/stop button with the shift lever in the P (Park) or the N (Neutral) position. For your safety, start the engine with the shift lever in the P (Park) position. ✽ NOTICE If you press the engine start/sto ...

© 2016-2024 www.kniro.net