Description |
Curtain airbags are installed inside the headliner (LH and RH) and protect the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of curtain airbag by using side impact sensor (SIS) signal.
Never attempt to measure the circuit resistance of the airbag module even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury. |
Kia Niro 2017 (DE HEV) Service Manual: Blower Motor Repair procedures
Inspection
1.
Operate the heater controls at IGN2 to ensure that the motor is running.
1. Battery (+)
2. Input signal
3. ?
4. Ground
2.
If the blower motor does ...
Kia Niro 2017 (DE HEV) Service Manual: Muffler Repair procedures
Removal and Installation
Front Muffler
1.
Disconnect the heated oxygen sensor connector (A) and then remove it
from the bracket.
2.
Remove the under cover (A).
Tightening torque :
7.8 - 9.8 N·m (0.8 - 1.0 ...