Kia Niro: Crash Pad / Crash Pad Under Cover Repair procedures

Replacement

Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•	Be careful not to bend or scratch the trim and panels.

1.	Remove the crash pad under cover [RH] (A) after loosening the mounting screws.

Install in the reverse order of removal.

•	Make sure the connector is connected properly.

•	Replace any damaged clips.

Replacement Put on gloves to protect your hands. ...

Component Location 1. Crash pad main lower panel ...

Kia Niro 2017 (DE HEV) Service Manual: Input Speed Sensor Specification
Specification Item Specification Type Hall effect sensor Operating condition -22 to 257 ° F (-30 to 125 ° C) Output signal High: 11.8 - 16.8 mA Low: 5.9 ...

Kia Niro 2017 (DE HEV) Service Manual: BMS ECU Schematic diagrams
BMS ECU Terminal And Input/Output Signal Connector [B01-VC] (24pin) : High Voltage Battery Cell Voltage Check Connector Pin No. Description Connected to 1 - - 2 ...