Kia Niro: Crash Pad / Crash Pad Lower Panel Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the crash pad side cover [LH] (A) by using a remover.

2.

Remove the crash pad lower panel (A) after loosening the screw.

3.

Disconnect the fuel filler door switch connector (A).

4.

Install in the reverse order of removal.

  

Make sure the connector is connected properly.

Replace any damaged clips.

Crash Pad Lower Panel Components and components location
Component Location 1. Crash pad lower panel ...

Glove Box Housing Components and components location
Component Location 1. Glove box housing complete ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Power Seat Motor Repair procedures
Inspection Power Seat Motor 1. Disconnect the connectors for each motor. [Slide motor (A)] [Rear height motor (B)] [Front tilt motor (C)] [Reclining motor (D)] [Lumber support motor (E)] ...

Kia Niro 2017 (DE HEV) Service Manual: Audio Unit Components and components location
Components [RADIO/CD/MP3] Connector Pin Information No. Connector A Connector B 1 Rear left speaker (+) - 2 Rear left speaker (-) MIC (+) ...

© 2016-2022 www.kniro.net