Kia Niro: Cooling System / Cooling Fan Description and operation

Description

Controls the cooling fan motor voltage depending on the duty output from the ECU (Freq.: 300Hz).

[Signal from the ECU to the PWM (SI: 300Hz)]

Cooling Fan Components and components location
Components 1. Cooling fan 2. Cooling fan motor 3. Cooling fan shroud 4. Air dam 5. Cooling fan controller (PWM) ...

Cooling Fan Specifications
Specifications Item Specification Fan type Puller Fan speed control PWM Air flow rat ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Blower Unit Repair procedures
Replacement    When prying with a flat-tip screwdriver or a prying trim tool, wrap a protective tape around the related parts and the tool to prevent damage. 1. Disconnect the negative (- ...

Kia Niro 2017 (DE HEV) Service Manual: Components and components location
Components 1. Water jacket insert 2. Cylinder block 3. Oil ring 4. Rear oil seal 5. Crankshaft upper bearing 6. Thrust bearing 7. Crankshaft 8. Pilot bearing 9. Crankshaft lower bearing 10. Crankshaft lower bearing cap 11. ...

© 2016-2024 www.kniro.net