Kia Niro: Phone / Connecting Bluetooth® devices
If there are no connected devices
Select the [PHONE] button on the audio system or the [CALL] button in the steering wheel remote control ➟ List of paired Bluetooth® devices ➟ Select the desired Bluetooth® device from the list ➟ Connect Bluetooth®.
If there are connected devices
Select the [PHONE] button on the audio system ➟ Select [Settings] ➟ Select [Connections] ➟ Select Bluetooth® device to connect ➟ Select [Connect] ➟ Connect Bluetooth®.
✽ NOTICE
- Only one Bluetooth® device can be connected at a time.
- When a Bluetooth® device is connected, other devices cannot be paired.
Pairing a Bluetooth® device
Information on pairing Bluetooth® devices
Pairing refers to the process of pairing Bluetooth® cell phones or devices
with the system prior to connection. This is a necessary procedure for Blu ...
Accepting/rejecting phone calls
Receiving phone calls with Bluetooth® connected.
(1) Caller name: If the caller number is in your contacts, the corresponding
name is displayed.
(2) Incoming phone number: Incoming phone number ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Power Relay Assembly (PRA) Description and operation
Description
The Power Relay Assembly (PRA) consists of the positive and negative main relays,
pre-charge relay, pre-charge resistor and battery current sensor. It is located
inside the battery pack assembly and controls the high voltage power circuit between
the high voltage batte ...
Kia Niro 2017 (DE HEV) Service Manual: Manifold Absolute Pressure Sensor (MAPS) Repair procedures
Inspection
1.
Connect the KDS/GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS during idle with IG ON.
Pressure
[kPa (kgf/cm², psi)]
Output Voltage (V) [Vref = 5V]
...
