Kia Niro: Hybrid Control System / Components and components location

Components Location

1. Hybrid Power Control Unit (HPCU)
2. Hybrid Control Unit (HCU)
3. Brake Switch
4. DC Fuse

  

HPCU includes the HCU (Hybrid Control Unit), Inverters (for Drive Motor, HSG and Electric A/C Compressor), MCU (Motor Control Unit) and LDC (Low DC / DC Converter).

  

For the location of the other control modules, refer to the relevant group.

1. Hybrid Power Control Unit (HPCU)
2. Hybrid Control Unit (HCU)
3. Brake Switch

4. DC Fuse


Hybrid Control System
...

Description and operation
Description The HCU (Hybrid Control Unit) controls the overall hybrid systems and is connected with each of the control modules (ECM, TCM, MCU, BMS, ECU, etc.) via CAN. The hybrid sys ...

Other information:

Kia Niro (DE HEV) Owners Manual: Hazard warning flasher
■ Type A ■ Type B The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle. It should be used whenever emergency repairs are being made or when the vehicle is stopped near the edge of a roadway. ...

Kia Niro 2017 (DE HEV) Service Manual: Description and operating principle
Description and Operation Wireless Power Charger System During ACC or IG ON, battery voltage is supplied to the wireless power charger system to transmit an output of 5 W to mobile phone. Mobile phones certified with the wireless charging standard WPC (Qi 1.1.2) or equipped wit ...

© 2016-2024 www.kniro.net