Component Location |
1. BMS ECU 2. Safety Plug 3. Main Relay (+) 4. Main Relay (-) 5. Pre-Charge Relay 6. Pre-Charge Resistor |
7. Battery Current Sensor 8. Main Fuse [Safety Plug] 9. Battery Temperature Sensor 10. Battery Inlet Temperature Sensor |
Main Relays (Positive, Negative), Pre-Charge Relay, Pre-Charge Resistor, and Battery Current Sensor are integrated into the PRA. |
1. BMS ECU |
2. Safety Plug |
|
|
3. Main Relay (+) 4. Main Relay (-) 5. Pre-Charge Relay 6. Pre-Charge Resistor 7. Battery Current Sensor |
8. Main Fuse [Safety Plug] |
|
|
9. Battery Temperature Sensor 10. Battery Inlet Temperature Sensor |
|
|
Kia Niro (DE HEV) Owners Manual: Regenerative Brake Warning Light
This warning light illuminates :
When the regenerative brake does not operate and the brake does not perform well.
This causes the Brake Warning light (red) and Regenerative Brake Warning Light (yellow)
to illuminate simultaneously.
In this case, drive safely and we recommend that you have y ...
Kia Niro 2017 (DE HEV) Service Manual: Dynamic Damper Components and components location
Components
1. BJ assembly
2. BJ circlip
3. BJ boot band
4. BJ boot
5. Dynamic damper band
6. Dynamic damper
7. Shaft
8. TJ boot band
9. TJ boot
10. Spider assembly
11. Snap ring
12. TJ housing
13. T ...