Kia Niro: Fuel Delivery System / Components and components location

Components Location
[Fuel Tank Assembly]

1. Fuel Tank
2. Fuel Pump Assembly
3. Canister
4. Fuel Tank Air Filter
5. Fuel Tank Band
6. Fuel Filler Hose
7. Leveling Hose
8. Ventilation hose
9. Vapor Tube
10. Fuel Pump Plate Cover

[Fuel Pump Assembly]

1. Fuel Pressure Sensor (FPS)
2. Fuel Pressure Control Module (FPCM)
3. Head Assembly
4. Fuel Pump Motor
5. Fuel Filter
6. Fuel Pressure Regulator
7. Fuel Sender
8. Pre-filter
9. Reservoir Cup
10. Fuel Feed Tube
11. Fuel Feed Tube Port

[High Pressure Fuel Line]

1. High pressure fuel pump
2. High pressure fuel pipe
3. Delivery pipe
4. Injector

  

In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure fuel. So don’t do any repair work right after engine stops.

Fuel Delivery System
...

Fuel pressure test (low pressure system)
Fuel Pressure Test (Low pressure system) 1. Release the residual pressure in fuel line. (Refer to the Fuel Delivery System - Inspection - "Release Residual Pre ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Gear Actuator Assembly Repair procedures
Removal    • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety instr ...

Kia Niro (DE HEV) Owners Manual: To turn off the speed limit control, do one of the following
Press the CRUISE & SPEED LIMIT MODE switch. Turn the ignition off. If you press the cancel O switch once, the set speed limit will cancel, but it will not turn the system off. If you wish to reset the speed limit, move the lever up (to RES+) or down (to SET-) to the desired speed. ...

© 2016-2024 www.kniro.net