Kia Niro: Engine Control System / Camshaft Position Sensor (CMPS) Description and operation
| Description |
Camshaft Position Sensor (CMPS) is a hall sensor, which detects the camshaft position by using a hall element.
It is related with Crankshaft Position Sensor (CKPS) and detects the piston position of each cylinder which cannot be detected by the CKPS.
The CMPS is installed on engine head cover and uses a target wheel installed on the camshaft. The Camshaft Position Sensor is a hall-effect type sensor. As the target wheel passes the Hall sensor, the magnetic field changes in the sensor. The sensor then switches a signal which creates a square wave.
Crankshaft Position Sensor (CKPS) Troubleshooting
Signal Waveform
This example shows a typical Crankshaft Position Sensor (CKPS) and Camshaft Position
Sensor (CMPS) waveforms at idle. The PCM controls the injection and ignition tim ...
Camshaft Position Sensor (CMPS) Schematic diagrams
Circuit Diagram
Harness Connector
CMPS [Bank 1 / Intake]
CMPS [Bank 1 / Exhaust]
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: TJ Joint Components and components location
Components
[LH]
1. BJ assembly
2. BJ circlip
3. BJ boot band
4. BJ boot
5. Dynamic damper band
6. Dynamic damper
7. Shaft
8. TJ boot band
9. TJ boot
10. Spider assembly
11. Retainer ring
12. TJ hou ...
Kia Niro (DE HEV) Owners Manual: Air bag collision sensors
(1) SRS control module
(2) Front impact sensor
(3) Side pressure sensor (if equipped)
(4) Side impact sensor (if equipped)
WARNING
Do not hit or allow any objects to impact the locations where air bag
or sensors are installed.
This may cause unexpected air bag deployment, which could ...
