Kia Niro: Hybrid Control System / Brake Switch Specifications

Kia Niro 2017 (DE HEV) Service Manual / Hybrid Control System / Hybrid Control System / Brake Switch Specifications

Specification

Item		Brake pedal release	Brake pedal depressed
Switch 1		Max. 0.5V	Battery Voltage
Switch 2	IG OFF	Max. 50mV
	IG ON	Battery Voltage	Max. 0.5V

Items	Specification
Gap [mm (in)]	1.0 ~ 2.0 (0.039 ~ 0.079)

Hybrid Control Unit (HCU) Repair procedures

Removal • Be sure to read and follow the “General Safety Information and Caution” ...

Brake Switch Description and operation

Description Installed on the brake pedal and linked with the HCU and the stop lamp, the brake switch sensors the status of the brake pedal (Release/Depress) and informs the HCU. ...

Other information:

Kia Niro (DE HEV) Owners Manual: Warning type
The system will activate when: 1.The system is on 2.Vehicle speed is above 30 km/h (18.6 mph) 3.Other vehicles are detected in the rear side 1st stage If a vehicle is detected within the boundary of the system, a warning light will illuminate on the outside rearview mirror. If the detected ...

Kia Niro 2017 (DE HEV) Service Manual: Power Seat Control Switch Schematic diagrams
Circuit Diagram [Driver power seat switch] (Non-IMS Type) (IMS Type) ...