Kia Niro: Driving your vehicle / Blind spot detection system
The Blind spot detection system uses a radar sensor to alert the driver while driving.
It senses the rear side territory of the vehicle and provides information to the driver.
➀ Blind spot detection
Warning range is dependent on your vehicle speed. However, if the speed of your vehicle is faster by 10km/h or more than other nearby vehicles, the warning is not operated.
➁ Lane change assist
When vehicles are approaching to your vehicle at high speed, the warning is operated.
➂ Rear cross traffic alert
When your vehicle moves backward, the sensor detects approaching vehicles to the left or right side direction and warning is operated.
WARNING
- Always check the road condition while driving for unexpected situations even though the Blind spot detection system is operating.
- Blind spot detection system is a system made for convenience. Do not solely rely on the system but always pay attention to drive safely.
Active LKA
LKAS operates for a vehicle to keep the region of lane center more efficiently.
The steering assistance is activated more frequently and earlier than standard
LKA.
LDW is generated when the ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Diagnosis With KDS/GDS
1.
BSD system defects can be quickly diagnosed with the KDS/GDS. GDS operates
actuator quickly to monitor, input/output value and self diagnosis.
2.
Connect the cable of KDS/GDS to the data link connector in driver side ...
Kia Niro 2017 (DE HEV) Service Manual: Ambient Temperature Sensor Description and operation
Description
Located at the front of the condenser, the ambient temperature sensor detects
the ambient air temperature. It is a negative type thermistor; resistance will increase
at lower temperature and decrease at higher temperature.
The sensor output is used to control discharge ...
