Kia Niro: Blind Spot Detection system (BSD) / Blind Spot Detection Indicator Repair procedures
| Removal |
| Blind Spot Detection Warning Indicator |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the mirror (A) from the mirror holder.
|
| 3. |
Disconnect the mirror heated connector (B) and BSD indicator connector (A).
|
| 4. |
Remove the BSD indicator (A).
|
| Installation |
| Blind Spot Detection Warning Indicator |
| 1. |
Install the BSD indicator. |
| 2. |
Connect the mirror heated connector and BSD indicator connector. |
| 3. |
Install the mirror. |
| 4. |
Connect the negative (-) battery terminal. |
| Inspection |
| 1. |
Verify that the mirror operates properly as shown in the below table.
|
Blind Spot Detection Indicator Components and components location
Components
1. BSD Indicator
2. Side repeater lamp
...
Other information:
Kia Niro (DE HEV) Owners Manual: Hybrid System Gauge
The hybrid system gauge indicates whether the current driving condition is fuel
efficient or not.
CHARGE : Shows that the energy made by the vehicle is being converted to
electrical energy. (Regenerated energy)
ECO : Shows that the vehicle is being driven in an Ecofriendly manner.
POW ...
Kia Niro (DE HEV) Owners Manual: Operating conditions
The indicator on the switch will illuminate when the Blind spot detection system
switch is pressed with the ignition switch ON. If the vehicle speed exceeds 30 km/h
(18.6 mph), the system will activate.
If you press the switch again, the switch indicator and system will be turned
off.
If t ...
