Kia Niro: Driveshaft Assembly / BJ Boot Components and components location

Kia Niro 2017 (DE HEV) Service Manual / Driveshaft and axle / Driveshaft Assembly / BJ Boot Components and components location

Components

1. BJ assembly
2. BJ circlip
3. BJ boot band
4. BJ boot

5. Dynamic damper band
6. Dynamic damper
7. Shaft
8. TJ boot band

9. TJ boot
10. Spider assembly
11. Snap ring
12. TJ housing

13. TJ circlip

Dynamic Damper Repair procedures

Replacement 1. Remove the front driveshaft. (Refer to Driveshaft Assembly - “Front Driveshaft”) 2. Remove the TJ joint assembly. (Refe ...

BJ Boot Repair procedures

Replacement 1. Remove the front driveshaft. (Refer to Driveshaft Assembly - “Front Driveshaft”) 2. Remove the TJ joint assembly. (Refe ...

Other information:

Kia Niro (DE HEV) Owners Manual: Driving on grades
Reduce speed and shift to a lower gear before you start down a long or steep downgrade. If you don’t shift down, you might have to use your brakes so much that they would get hot and no longer operate efficiently. On a long uphill grade, shift down and reduce your speed to around 70 km/h (45 ...

Kia Niro 2017 (DE HEV) Service Manual: TJ Joint Repair procedures
Replacement • Special grease must be applied to the driveshaft joint. Do not substitute with another type of grease. • The boot band should be ...