Description |
Built into the Power Relay Assembly (PRA), the Battery Current Sensor measures the current of the high voltage battery while charging or discharging.
1. High Voltage Power Terminal (-) 2. High Voltage Power Terminal (+) 3. Battery Current Sensor 4. Inverter Power Terminal (-) 5. Inverter Power Terminal (+) 6. Pre-Charge Resistor |
7. Main Relay (+) 8. Pre-Charge Relay 9. Main Relay (-) 10. Power Relay Assembly Connector (Battery current sensor signal input) 11. Power Relay Assembly Connector (Main relay control) |
Kia Niro 2017 (DE HEV) Service Manual: CVVT Oil Control Valve (OCV) Repair procedures
Inspection
1.
Switch "OFF" the ignition.
2.
Disconnect the OCV connector.
3.
Measure resistance between the OCV terminals 1 and 2.
4.
Check that the resistance is within the specificat ...
Kia Niro 2017 (DE HEV) Service Manual: Camshaft Position Sensor (CMPS) Repair procedures
Inspection
1.
Check the signal waveform of the CMPS and CKPS using the KDS/GDS.
Specification: Refer to “Wave Form”
Removal
...