Kia Niro: AVN System / AVN Antenna Repair procedures

Removal

Roof antenna

1.

Disconnect the negative (-) battery terminal.

2.

Remove the roof trim assembly.

(Refer to Body - "Roof Trim Assembly")

3.

Disconnect the roof antenna cable and connectors (A).

4.

Remove the roof antenna (B) after loosening a nut (A).

Installation

Roof anenna

1.

Install the roof antenna.

2.

Connect the roof antenna connectors.

3.

Install the roof trim assembly.

4.

Connect the negative (-) battery terminal.

  

Make sure that the cables and connectors are plugged in properly.

Check the AVN system for normal operation.

AVN Antenna Components and components location
Components [Roof Antenna (AM/FM + DAB + GNSS] ...

AVN Remote Controller Components and components location
Components 1. Left Remote Control Switch (Audio + Hands free + Voice) 2. Right Remote Control Switch (Cruise+Trip Computer) ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: General safety information and caution
Safety Precaution Precautions to take before servicing high voltage system    Hybrid vehicles have high voltage batteries. Incorrect handling of high voltage sy ...

Kia Niro 2017 (DE HEV) Service Manual: DCT Control Module (TCM) Repair procedures
Inspection 1. TCM ground circuit test : Measure the resistance between TCM and chassis ground. (Inspect the terminal connected to the chassis ground with the back of harness connector as the inspection point of TCM side.) Specification : Below ...

© 2016-2023 www.kniro.net