Kia Niro: Lighting control / Auto light
When the light switch is in the AUTO light position, the taillights and headlights will be turned ON or OFF automatically depending on the amount of light outside the vehicle.
CAUTION
- Never place anything over the sensor (1) located on the instrument panel. This will ensure better auto-light system control.
- Don’t clean the sensor using a window cleaner. The cleaner may leave a light film which could interfere with sensor operation.
- If your vehicle has window tint or other types of metallic coating on the front windshield, the Auto light system may not work properly.
Headlight position
When the light switch is in the headlight position (4th position), the head,
tail, license and instrument panel lights will turn ON.
✽ NOTICE
The ignition switch must be in the ON position t ...
High beam operation
To turn on the high beam headlamp, push the lever away from you. The lever will
return to its original position.
The high beam indicator will light when the headlight high beams are switched
on ...
Other information:
Kia Niro (DE HEV) Owners Manual: Malfunction indicator
The VSM can be deactivated even if you don’t cancel the VSM operation by pressing
the ESC OFF button. It indicates that a malfunction has been detected somewhere
in the EPS (Electronic Power Steering) system or VSM system. If the ESC indicator
light () or EPS warning light remains
on, we r ...
Kia Niro (DE HEV) Owners Manual: To adjust the sensitivity of smart cruise control
The sensitivity of vehicle speed when following the front vehicle to maintain
the set distance can be adjusted. Go to the User Settings Mode and select the Driving
Assist and select SCC (smart cruise control) and select the Response.You may select
one of the three stages you prefer.
Slow:
...
