Replacement |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the auto defogging sensor cover (A).
|
3. |
Using a screwdriver or a remover, remove the LDWS & rain sensor cover (A).
|
4. |
Remove the auto defogging sensor connector (B) and the auto defogging sensor (A).
|
5. |
Install in the reverse order of removal. |
Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description
Regeneration Brake
System
During deceleration or braking of an electric vehicle or HEV, the drive motor
acts as an alternator and charges the battery by converting the vehicle’s kinetic
energy generated during braking into electrical energy. Regenerative braking am ...
Kia Niro (DE HEV) Owners Manual: Recommended SAE viscosity number
CAUTION
Always be sure to clean the area around any filler plug, drain plug, or dipstick
before checking or draining any lubricant. This is especially important in dusty
or sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug
and dipstick areas will prevent dirt and gr ...