Kia Niro: Windshield wipers / Auto control

The rain sensor (A) located on the upper end of the windshield glass senses the amount of rainfall and controls the wiping cycle for the proper interval. The more it rains, the faster the wiper operates. When the rain stops, the wiper stops.

To vary the speed setting, turn the speed control knob (1).

If the wiper switch is set in AUTO mode when the ignition switch is ON, the wiper will operate once to perform a self-check of the system. Set the wiper to OFF (O) position when the wiper is not in use.

CAUTION

When the ignition switch is ON and the windshield wiper switch is placed in the AUTO mode, use caution in the following situations to avoid any injury to the hands or other parts of the body:

CAUTION

Windshield wipers
Operates as follows when the ignition switch is turned ON. (1) MIST/ : For a single wiping cycle, move the lever to this (MIST/ ) position and release it. The wipers will operate continuously if ...

Windshield washers
■ Type A ■ Type B In the OFF (O) position, pull the lever gently toward you to spray washer fluid on the windshield and to run the wipers 1-3 cycles. Use this function when the windshield ...

Other information:

Kia Niro (DE HEV) Owners Manual: Vehicle weight
This section will guide you in the proper loading of your vehicle and/or trailer, to keep your loaded vehicle weight within its design rating capability, with or without a trailer. Properly loading your vehicle will provide maximum return of the vehicle design performance. Before loading your ...

Toyota Corolla 2019-2022 Owners Manual: System components
A - Meter control switches Turning the Blind Spot Monitor on/off. B - Outside rear view mirror indicators When a vehicle is detected in a blind spot of the outside rear view mirrors or approaching rapidly from behind into a blind spot, the outside rear view mirror indicator on the detected side w ...

© 2016-2022 www.kniro.net