Kia Niro: Air Conditioning System / Ambient Temperature Sensor Repair procedures
| Inspection |
| 1. |
Check the resistance of the ambient temperature sensor between terminals 1 and 2 whether it changes by changing the ambient temperature.
Specification
|
| Replacement |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the front bumper. (Refer to Body - "Front Bumper Cover") |
| 3. |
Disconnect the connector (A) and remove the ambient temperature sensor (B).
|
| 4. |
Install in the reverse order of removal. |
Ambient Temperature Sensor Description and operation
Description
Located at the front of the condenser, the ambient temperature sensor detects
the ambient air temperature. It is a negative type thermistor; resistance will increase
at lo ...
Auto Defogging Sensor Description and operation
Description
Installed on the windshield glass, the auto defogging sensor detects humidity
to blow out wind for defogging to improve visibility and driver comfort. The air
conditioner ...
Other information:
Kia Niro (DE HEV) Owners Manual: Main fuse
If the main fuse is blown, it must be removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery cable.
3. Remove the nuts shown in the picture above.
4. Replace the fuse with a new one of the same rating.
5. Reinstall in the reverse order of removal
✽ NOTICE
The elect ...
Kia Niro 2017 (DE HEV) Service Manual: TPMS Receiver Repair procedures
Removal
1.
Disconnect the battery negative cable.
2.
Remove the glove box.
(Refer to Body - "Glove Box Housing")
3.
Disconnect the blower motor connector (A).
4.
Disconnect ...
