Kia Niro: Air Conditioning System / Ambient Temperature Sensor Description and operation

Description

Located at the front of the condenser, the ambient temperature sensor detects the ambient air temperature. It is a negative type thermistor; resistance will increase at lower temperature and decrease at higher temperature.

The sensor output is used to control discharged air temperature, calibrate the sensor, control temperature control door, control the blower motor level, control the mix mode and control the in-car humidity.

  

If the ambient temperature is below 2.0°C (35.6°F), the A/C compressor will stop.

The compressor will operate manually.

Photo Sensor Repair procedures
Inspection 1. Switch "ON" the ignition. 2. Connect the KDS/GDS. 3. Emit intensive light toward the photo senso ...

Ambient Temperature Sensor Repair procedures
Inspection 1. Check the resistance of the ambient temperature sensor between terminals 1 and 2 whether it changes by changing the ambient temperature. ...

Other information:

Peugeot 2008 2019-2024 Owner's Manual: Green warning/indicator lamps
Hill Assist Descent ControlFixed. (grey) The function has been activated, but is currently paused because the speed is too high. Reduce the vehicle speed to below 19 mph (30  km/h). Fixed. The system has been activated, but the conditions for regulation are not met (gradient, speed too high ...

Kia Niro 2017 (DE HEV) Service Manual: Rear Bumper Cover Repair procedures
Replacement    Put on gloves to protect your hands.    • Use a plastic panel removal tool to remove interior trim pie ...

© 2016-2024 www.kniro.net