Kia Niro: Air Conditioning System / A/C Pressure Transducer Description and operation
| Description |
A/C pressure transducer measures the pressure in high pressure line and converts it into voltage. Based on the converted voltage, engine ECU controls cooling fan by operating it at high or low speed. Engine ECU stops the operation of compressor when the temperature of refrigerant line is too high or low irregularly to optimize air conditioning system.
A/C Pressure Transducer Components and components location
Components Location
1. A/C Pressure Transducer
...
A/C Pressure Transducer Repair procedures
Inspection
1.
Measure the pressure of high pressure line by measuring voltage output
between terminals "1" and “2”.
2.
C ...
Other information:
Kia Niro (DE HEV) Owners Manual: Jump starting procedure
1.Make sure the booster battery is 12-volt and that its negative terminal is
grounded.
2.If the booster battery is in another vehicle, do not allow the vehicles come
in contact.
3.Turn off all unnecessary electrical loads.
4.Connect the jumper cables in the exact sequence shown in the illustr ...
Kia Niro 2017 (DE HEV) Service Manual: Electric EGR Control Valve Specifications
Specification
[Motor]
Item
Specification
Coil Resistance (Ω)
2.21 - 2.99 [20°C(68°F)]
Pin
2
[Position sensor]
Item
Specification
Sensor Po ...
