Kia Niro: Virtual Engine Sound System (VESS) / Virtual Engine Sound Speaker Repair procedures

Removal
1.

Disconnect the negative(-) battery terminal.

2.

Remove the front bumper cover.

(Refer to Body - "Front Bumper Cover")

3.

Remove the high pitch horn and low pitch horn.

(Refer to Body Electrical System - "Horn")

4.

Disconnect the VESS speaker connector (A).

5.

Remove the VESS speaker (A) after loosening the mounting bolts.

Installation
1.

After connecting the VESS connectors, install the VESS speaker.

2.

After connecting the horn connectors, install both high pitch and low pitch horns.

3.

Install the front bumper cover.

4.

Connect the negative (-) battery terminal.

Virtual Engine Sound Speaker Components and components location
Component Location ...

Windshield Wiper/Washer
...

Other information:

Toyota Corolla 2019-2023 Owners Manual: Operating HomeLink
Press the appropriate Home- Link® button. The HomeLink® indicator light should turn on. The status of the opening and closing of a garage door is shown by the indicators. A - Opening C - Closing This function is only available if the garage door opener motor used is a compatible device. The i ...

Kia Niro 2017 (DE HEV) Service Manual: Auto Defogging Actuator Repair procedures
Inspection 1. Switch "OFF" the ignition. 2. Disconnect the auto defogging sensor connector. 3. Connect the power (+) terminal to mode actuator connector terminal 3, and ground the negative (-) terminal to t ...

© 2016-2023 www.kniro.net