Displays information related to the current trip (range, fuel consumption, average speed, etc.).
Data displayed on the instrument panel
With instrument panels with dials
Pressing the end of the wiper control stalk displays the trip computer data.
With digital instrument panel
The trip computer data is permanently displayed when the "PERSONAL" display mode is selected.
In all other display modes, pressing the end of the wiper control stalk will cause this data to appear temporarily in a specific window.
Display of the various tabs
Trip reset
Trips "1" and "2" are independent and are used identically.
Definitions
Range
(miles or km)
The distance which can still be
travelled with the fuel remaining in the tank (depending on the average fuel
consumption over the last few miles (kilometres) travelled).
This value may vary following a change in the style of driving or the terrain, resulting in a significant change in the current fuel consumption.
When the range falls below 19 miles (30 km), dashes are displayed.
After filling with at least 5 litres of fuel, the range is recalculated and is displayed if it exceeds 62 miles (100 km).
If dashes instead of figures continue to be displayed when driving, contact a PEUGEOT dealer or a qualified workshop.
Current fuel consumption
(mpg or l/100 km or km/l)
(miles/kWh or kWh/100 km or km/kWh)
Calculated during the last few
seconds.
This function is only displayed at speeds above 19 mph (30 km/h).
Average fuel consumption
(mpg or l/100 km or km/l)
(miles/kWh or kWh/100 km or km/kWh)
Calculated since the last trip
computer reset.
Average speed
(mph or km/h)
Calculated since the last trip
computer reset.
Distance travelled
(miles or km)
Calculated since the last trip
computer reset.
Stop & Start time counter
(minutes/seconds or hours/minutes)
If your vehicle is equipped with Stop & Start, a time counter calculates the time spent in STOP mode during a journey.
It resets to zero every time the ignition is switched on.
Kia Niro 2017 (DE HEV) Service Manual: Blind Spot Detection Radar Calibration Description and operation
Description
To correctly sense vehicles on the neighboring lanes using the radar, the direction
of the sensor and the direction of the vehicle must be aligned.
This is the BSD unit alignment. If this alignment is not performed as in illustration
below, it may cause degradation of ...
Kia Niro (DE HEV) Owners Manual: Installing a Child Restraint System (CRS)
WARNING
Before installing your Child Restraint System always:
Read and follow the instructions provided by the manufacturer of the Child
Restraint System.
Failure to follow all warnings and instructions could increase the risk of
the SERIOUS INJURY or DEATH if an accident occurs.
WARNING
If ...