Kia Niro: Chassis / Tire (pressure & tread wear) Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Maintenance / Chassis / Tire (pressure & tread wear) Repair procedures

Inspection
1.

Check the tire pressure.

16(inch) : 230 kPa (33 psi)

18(inch) : 230 kPa (33 psi)

Tire Rotation

Checking For Pull And Wander

If the steering pulls to one side, rotate the tires according to the following wheel rotation procedure.

1.

Rotate the front right and front left tires, and perform a road test in order to confirm vehicle stability.

2.

If the steering pulls to the opposite side, rotate the front and rear tires, and perform a road test again.

3.

If the steering continues to pull to one side, rotate the front right and left tires again, and perform a road test.

4.

If the steering continues to pull to the opposite side, replace the front wheels with new ones.

Tire Wear

  

Using tires and wheel other than the recommended sizes could cause unusual handling characteristics and poor vehicle control, resulting in a serious accident.

1.

Measure the tread depth of the tires.

Tread depth [limit] : 1.6 mm (0.0630 in.)

2.

If the remaining tread depth (A) is less than the limit, replace the tire.

  

When the tread depth of the tires is less than 1.6 mm(0.0630 in), the wear indicators (B) will appear.

Suspension Mounting Bolts Repair procedures
Inspection Visually check the loose mount bolt. ...

Body
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Fuel Sender Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump") 2. Disconnect the fuel sender connector (A). 3. Lift the fixing hook (A) by using a common driver, and then remove the ...

Kia Niro 2017 (DE HEV) Service Manual: Waist Line Molding Repair procedures
Replacement    Put on gloves to protect your hands.    • Use a plastic panel removal tool to remove interior trim pie ...

© 2016-2024 www.kniro.net