Peugeot 2008: Indicators / Thermal comfort consumption indicator (Electric)

Peugeot 2008 2019-2023 Owner's Manual / Instruments / Indicators / Thermal comfort consumption indicator (Electric)

Peugeot 2008. Thermal comfort consumption indicator (Electric)

The gauge shows the consumption of electric power for thermal comfort functions.

It concerns the following equipment and systems:

The traction battery powers the heating and air conditioning systems.

This equipment and these functions can be used:

Selecting Eco mode limits the performance of some equipment. The needle or cursor on the moves into the "ECO" zone.

Peugeot 2008. Thermal comfort consumption indicator (Electric) To quickly heat or cool the passenger compartment, feel free to temporarily select the maximum heating or cooling setting.

Excessive use of thermal comfort equipment, particularly at low speed, can significantly decrease the vehicle's range.

Remember to optimise equipment settings upon achieving the desired level of comfort, and adjust them if necessary whenever you start the vehicle.

After an extended period without using the heating, you may notice a slight odour during the first few minutes of use.

Charge level indicator (Electric)
The traction battery charge status and remaining range are displayed continuously when the vehicle is started. With the ignition off, opening the driver's door activates the indicator. Associated ...

Manual test. Total distance recorder
Manual test This function allows you to check certain indicators and display the alerts log. It can be accessed via the "Check" button in the Driving/Vehicle touch screen menu. The following inform ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description System block diagram System function Camera unit of the LKAS processes below function with the video signal inputted 1. LKAS (Lane Keeping Assist System) : The system is designed to help recognize the lane ahead and to give off a lane departure ...

Kia Niro 2017 (DE HEV) Service Manual: DCT Control Module (TCM) Repair procedures
Inspection 1. TCM ground circuit test : Measure the resistance between TCM and chassis ground. (Inspect the terminal connected to the chassis ground with the back of harness connector as the inspection point of TCM side.) Specification : Below ...

© 2016-2023 www.kniro.net