Inspection |
Self Diagnosis With Scan Tool
It will be able to diagnose defects of SMART KEY system with KDS/GDS quickly. KDS/GDS can operates actuator forcefully, input/output value monitoring and self diagnosis.
The following three features will be major problem in SMART KEY system.
1. |
Problem in SMART KEY unit input. |
2. |
Problem in SMART KEY unit. |
3. |
Problem in SMART KEY unit output. |
So the following three diagnosis operates will be the major problem solution process.
1. |
SMART KEY unit Input problem : switch diagnosis |
2. |
SMART KEY unit problem : communication diagnosis |
3. |
SMART KEY unit Output problem : antenna and switch output diagnosis |
Switch Diagnosis
1. |
Connect the cable of KDS/GDS to the data link connector in driver side crash pad lower panel, turn the power on KDS/GDS. |
2. |
Select the vehicle model and then SMART KEY system. |
3. |
Select the "SMART KEY unit". |
4. |
After IG ON, select the "Current data".
|
5. |
You can see the situation of each switch on scanner after connecting the "current data" process.
|
Communication Diagnosis With KDS/GDS (Self Diagnosis)
1. |
Communication diagnosis checks that the each linked components operates normal. |
2. |
Connect the cable of KDS/GDS to the data link connector in driver side crash pad lower panel. |
3. |
After IG ON, select the "DTC".
|
Antenna Actuation Diagnosis
1. |
Connect the cable of KDS/GDS to the data link connector in driver side crash pad lower panel. |
2. |
After IG ON, select the "Actation Test".
|
3. |
Set the smart key near the related antenna and operate it with a KDS/GDS. |
4. |
If the LED of smart key is blinking, the smart key is normal. |
5. |
If the LED of smart key is not blinking, check the voltage of smart key battery. |
6. |
Antenna actuation
|
Antenna Status Check
1. |
Connect the cable of KDS/GDS to the data link connector in driver side crash pad lower panel. |
2. |
Select the "Antenna Status Check".
|
3. |
After IG ON, select the "Antenna Status Check".
|
4. |
Set the smart key near the related antenna and operate it with a KDS/GDS.
|
5. |
If the smart key runs normal , the related antenna, smart key(transmission, reception) and exterior receiver are normal. |
6. |
Antenna status
|
FOB Status Check
1. |
Connect the cable of KDS/GDS to the data link connector in driver side crash pad lower panel. |
2. |
After IG ON, select the "FOB KEY STATUS INFO".
|
Smart Key Status Check
1. |
Connect the cable of KDS/GDS to the data link connector in driver side crash pad lower panel. |
2. |
After IG ON, select the "SMK STATUS INFO".
|
Neutralization Status Check
1. |
Connect the cable of KDS/GDS to the data link connector in driver side crash pad lower panel. |
2. |
After IG ON, select the "Neutralization mode".
|
Toyota Corolla 2019-2022 Owners Manual: Favorites list setting
Up to 15 contacts (maximum of 4 numbers per contact) can be registered in the
favorites list.
■ Registering the contacts in the favorites list
1 Select “Add Favorite”.
2 Select the desired contact to add to the favorites list.
Dimmed contacts are already stored as a favorite.
3 Check that a c ...
Kia Niro 2017 (DE HEV) Service Manual: Transmission Gear Oil Repair procedures
Inspection
Oil Level Check
1.
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
2.
Remove the oil filler plug (A or B).
3.
Check the condition of the oil and m ...