Kia Niro: Sunroof / Sliding the sunroof
To open or close the sunroof (manual slide feature), push the sunroof control lever backward or forward to the first detent position.
To open the sunroof (autoslide feature), push the sunroof control switch backward to the second detent position.
The sunroof will slide to the recommended open position (about 7 cm before the maximum slide open position).
To stop the sunroof sliding at any point, push the sunroof control switch momentarily.
To open the sunroof to the maximum slide open position, press the switch towards the rear of the vehicle once again and hold it until the sunroof slide all the way open.
✽ NOTICE
To reduce wind noise while driving, we recommend you to drive at the recommended position (about 7 cm before the maximum slide open position).
To close the sunroof (autoslide feature), move the sunroof control switch forward to the second detent position.
The sunroof will close all the way. To stop the sunroof sliding at any point, pull or push the sunroof control switch momentarily.
Sunroof
If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof
with the sunroof control switch located on the overhead console.
The sunroof can only be opened, closed, or tilted w ...
Automatic reversal
If an object or part of the body is detected while the sunroof is closing automatically,
it will reverse direction, and then stop.
The auto reverse function does not work if a small obstacle is b ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Front Door Belt Inside Weatherstrip Repair procedures
Replacement
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2.
Remove the front door belt inside weatherstrip (A).
3.
Install in the reverse order of removal.
...
Kia Niro (DE HEV) Owners Manual: Automatic reset
To make the average fuel economy be reset automatically whenever refueling, select
the “Fuel economy auto reset” mode in User Setting menu of the LCD display (Refer
to “LCD window”).
OFF - You may set to default manually by using the trip switch reset button.
After ignition - The v ...
