Kia Niro: Airbag Module / Side Airbag (SAB) Module Description and operation
| Description |
The Side Airbags (SAB) are installed inside the front seat and protects the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of side airbag by using Side Impact Sensor (SIS) signal.
Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury |
Passenger Airbag (PAB) Module Repair procedures
Removal
1.
Disconnect the battery negative terminal, and wait for at least three
minutes before beginning to work.
2.
Remove the glove box ass ...
Side Airbag (SAB) Module Components and components location
Components
1. Side Air Bag (SAB)
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Hazard Lamp Switch Repair procedures
Inspection
1.
Check for continuity between terminals. If the continuity is not as specified,
replace the hazard lamp switch.
[Audio Type]
Connector Pin
Information
No.
Description
No.
...
Kia Niro 2017 (DE HEV) Service Manual: Rear Door Module Repair procedures
Replacement
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to remove interior trim pie ...
