Kia Niro: High Voltage Battery Control System / Safety Plug Specifications

Kia Niro 2017 (DE HEV) Service Manual / Service Highlight / High Voltage Battery Control System / Safety Plug Specifications

Specification

Item		Specification
Rated Voltage (V)		450
Rated Current (A)		80
Fuse Rated Current (A)		125
Fuse Melting Time	Rated Current × 110%	Min. 4 hr
	Rated Current × 200%	5 - 100 sec
	Rated Current × 300%	0.5 - 15 sec
	Rated Current × 500%	Max. 1 sec

BMS ECU Repair procedures

Removal • Be sure to read and follow the “General Safety Information and Caution” ...

Safety Plug Description and operation

Description Safety Plug is installed on the rear side of the high voltage battery and it can mechanically shut the high voltage circuit off when servicing the high voltage system (i.e ...

Other information:

Kia Niro (DE HEV) Owners Manual: USB charger
The USB charger is designed to recharge batteries of small size electrical devices using a USB cable.The electrical devices can be recharged when the Engine Start/Stop button is in ACC/ON/START position. The battery charging state may be monitored on the electrical device. Disconnect the USB ...

Kia Niro 2017 (DE HEV) Service Manual: Auto Defogging Actuator Repair procedures
Inspection 1. Switch "OFF" the ignition. 2. Disconnect the auto defogging sensor connector. 3. Connect the power (+) terminal to mode actuator connector terminal 3, and ground the negative (-) terminal to t ...