Kia Niro: High Voltage Battery Control System / Safety Plug Schematic diagrams

Circuit Diagram

Harness Connector

[Interlock]

Safety Plug Description and operation
Description Safety Plug is installed on the rear side of the high voltage battery and it can mechanically shut the high voltage circuit off when servicing the high voltage system (i.e ...

Safety Plug Repair procedures
Removal    • Be sure to read and follow the “General Safety Information and Caution” ...

Other information:

Kia Niro (DE HEV) Owners Manual: Lap belt
To fasten your seat belt: To fasten a 2-point static type belt, insert the metal tab (1) into the locking buckle (2). There will be an audible "click" when the tab locks into the buckle. Check to make sure the belt is properly locked and that the belt is not twisted. With a 2-p ...

Kia Niro (DE HEV) Owners Manual: Tire replacement
If the tire is worn evenly, a tread wear Indicator (A) will appear as a solid band across the tread. This shows there is less than 1.6 mm (1/16 in.) of tread left on the tire. Replace the tire when this happens. Do not wait for the band to appear across the entire tread before replacing the ...

© 2016-2025 www.kniro.net