Kia Niro: Body Control Module (BCM) / Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body Electrical System / Body Control Module (BCM) / Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the glove box housing. (Refer to Body - "Glove Box Housing")

3.	Disconnect the blower motor connector (A).

4.	Disconnect the body control module connectors (A).

5.	Remove the body control module (A) after loosening the mounting bolts and nuts.

6.	Remove the body control module (B) after disconnecting the connector (A).

Installation

1.	Install the body control module (BCM).

2.	Connect the body control module connectors.

3.	Install the glove box housing.

4.	Connect the negative (-) battery terminal.

BCM Diagnosis With KDS/GDS

In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (KDS/GDS).

The diagnostic system (KDS/GDS) provides the following information.

(1)	Self diagnosis : Checking failure and code number (DTC)

(2)	Current data : Checking the system input/output data state

(3)	Actuation test : Checking the system operation condition

(4)	Additional function : Controlling other features including system option setting and zero point adjustment

2.	Select the "Car model" and the 'Body Control Module (BCM)' to be checked in order to check the vehicle with the tester.

3.	Select the 'Current Data' menu to search the current state of the input/output data.

4.	If you want to change user option, select "user option".

Description and operation

Description Body Control Module (BCM) function No Item Description 1 Washer Linked Wiper – ...

Blind Spot Detection system (BSD)

...

Other information:

Kia Niro (DE HEV) Owners Manual: Rear window wiper blade
1. Raise the wiper arm and pull out the wiper blade assembly. 2. Install the new blade assembly by inserting the center part into the slot in the wiper arm until it clicks into place. 3. Make sure the blade assembly is installed firmly by trying to pull it slightly. To prevent damage to the ...

Kia Niro 2017 (DE HEV) Service Manual: Vanity Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Detach the vanity lamp (A) using a flat-tip screwdriver. 3. Disconnect the vanity lamp connector (A). Bulb Replacement 1. ...