Kia Niro: Fender / Repair procedures

Replacement
  

Be careful not to damage the fender and body.

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

1.

Remove the headlamps.

(Refer to Front Bumper - "Front Bumper Cover")

2.

Remove the side seal molding.

(Refer to Body Side Molding - "Side Sill Molding")

3.

Remove the front wheel guard.

(Refer to Body Side Molding - "Front Wheel Guard")

4.

Remove the front bumper side bracket (A) after loosening the screws.

5.

Separate the hood weatherstrip (A).

6.

Remove the fender side cover (A) after loosening the mounting clips.

7.

After loosening the mounting screws, bolts, and nut, remove the fender assembly (A).

8.

Install in the reverse order of removal.

  

Replace any damaged clips.

Components and components location
Component Location 1. Fender assembly ...

Floor Carpet
...

Other information:

Kia Niro (DE HEV) Owners Manual: Tailgate room lamp bulb replacement
1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing. 2. Remove the bulb by pulling it straight out. 3. Install a new bulb in the socket. 4. Align the lens cover tabs with the lamp housing notches and snap the lens into place. CAUTION Be careful not to dirty or dam ...

Kia Niro 2017 (DE HEV) Service Manual: Specifications
Specification Item Specification Ultrasonic sensor Voltage rating DC 12 V Detecting range 11.8 - 47.2 in. (30 - 120 cm) Operation voltage DC 9 - 16 V ...

© 2016-2024 www.kniro.net